RRB NTPC UG Admit Card 2026 Out: Download Hall Ticket for June 13 Exam at rrb.digialm.com – Direct Link, Steps & Exam Day Instructions

The Railway Recruitment Board (RRB) has officially released the RRB NTPC UG Admit Card 2026 for candidates appearing in the Phase 2 Computer-Based Test (CBT 1) scheduled to begin on June 13, 2026. Candidates registered under CEN No. 07/2025 can now download their hall tickets from their respective regional RRB websites or through the common candidate login portal at rrb.digialm.com. The admit card is a mandatory document — candidates who fail to carry a printed copy will not be allowed to enter the examination hall.

The Phase 2 exam will be conducted from June 13 to June 20, 2026, across multiple examination centres in India. Around 63.27 lakh candidates have registered for 3,058 vacancies in various Non-Technical Popular Categories (NTPC) undergraduate-level posts in Indian Railways. The admit card is being released four days before each scheduled exam date, which means candidates with exams on later dates should watch their respective RRB websites closely for updates.

In-Article FAQ: When was the RRB NTPC UG Admit Card 2026 released for the June 13 exam? The admit card for the June 13 exam was released on June 10, 2026, at rrb.digialm.com and all regional RRB websites.

What is RRB NTPC UG Phase 2 CBT 1 — Key Exam Details at a Glance

Before downloading the admit card, candidates should be aware of the key details of the Phase 2 examination:

Recruitment Notification: CEN No. 07/2025 Exam Name: RRB NTPC Undergraduate Level CBT 1 (Phase 2) Phase 2 Exam Dates: June 13 to June 20, 2026 Total Vacancies: 3,058 Total Registered Candidates: 63.27 lakh (approximately) Admit Card Release: 4 days before each exam date Official Download Portal: rrb.digialm.com and regional RRB websites Exam Mode: Computer-Based Test (CBT) Exam Duration: 90 minutes (120 minutes for PwBD candidates with scribe) Total Questions: 100 (Multiple Choice Questions) Negative Marking: 1/3 mark deducted per wrong answer

Phase 1 of the examination was successfully conducted on May 7, 8, and 9, 2026, with candidates reporting an Easy to Moderate difficulty level overall.

How to Download RRB NTPC UG Admit Card 2026 — Step-by-Step Guide

Candidates can follow these simple steps to download their RRB NTPC UG Phase 2 hall ticket 2026:

Step 1: Visit the official website of your respective RRB region or go directly to rrb.digialm.com.

Step 2: On the homepage, look for the link that reads "RRB NTPC Undergraduate (CEN 07/2025) Admit Card" and click on it.

Step 3: Enter your Registration Number and Date of Birth (in DD/MM/YYYY format) or password in the login fields provided.

Step 4: Complete the captcha verification as prompted on the screen.

Step 5: Click on the Submit button to proceed.

Step 6: Your RRB NTPC UG Admit Card 2026 will appear on the screen. Verify all details carefully.

Step 7: Download the admit card as a PDF and take a clear printout. Carry this printout on your examination day without fail.

Important: Admit cards are NOT sent by post or any offline mode. Candidates must download and print their hall tickets themselves from the official portal.

In-Article FAQ: What do I need to log in and download the RRB NTPC UG Admit Card 2026? You need your Registration Number and Date of Birth (in DD/MM/YYYY format). Alternatively, candidates can also use their registered password if they set one during the application process.

Forgot Your Registration Number? Here Is What to Do

Candidates who cannot recall their registration number need not panic. The Railway Recruitment Board has a retrieval mechanism in place. You can recover your registration number using the email ID or mobile number that you submitted during the online application process. Visit your respective regional RRB website, look for the "Forgot Registration Number" or similar option, and follow the instructions to retrieve your credentials.

Documents Required at the RRB NTPC UG Exam Centre

Carrying the correct documents to the exam centre is as important as downloading the admit card. Candidates must bring the following:

1. A printed copy of the RRB NTPC UG Admit Card 2026 (compulsory)

2. One original valid photo identity proof from the list below:

• Aadhaar Card

• PAN Card

• Voter ID Card

• Passport

• Driving Licence

3. A recent passport-size photograph (may be required for verification purposes at some examination centres)

Candidates must note that photocopies or digital copies of identity proof on a mobile phone will NOT be accepted. Original documents are mandatory.

What to Check on Your RRB NTPC UG Admit Card 2026

Once you download your hall ticket, do not simply print it and set it aside. Carefully verify all the following details to ensure there are no errors:

• Candidate's full name (as registered)

• Roll number

• Registration number

• Photograph (should be clearly visible and match your appearance)

• Signature

• Examination date

• Shift timing and reporting time

• Examination centre name and address

If you notice any discrepancy or error in any of these details, contact your concerned RRB region immediately. Do not wait until the exam day to flag errors, as corrections may not be possible on short notice.

RRB NTPC UG Admit Card 2026 — Admit Card Release Schedule for Phase 2

The admit card for each exam date is being made available four days in advance. The city intimation slips for upcoming dates have already been released through June 18, 2026. Candidates with exam dates of June 14, 16, 17, 18, 19, and 20 should monitor their respective RRB websites daily and download their hall tickets as soon as the link goes live.

RRB NTPC UG CBT 1 Exam Pattern 2026 — Know Before You Sit

Understanding the exam pattern will help candidates utilise their remaining preparation time effectively. The CBT 1 for undergraduate-level posts comprises 100 Multiple Choice Questions spread across three sections:

General Awareness: 40 questions Mathematics: 30 questions General Intelligence and Reasoning: 30 questions

The total duration is 90 minutes for regular candidates and 120 minutes for PwBD candidates accompanied by a scribe. Each correct answer carries 1 mark, and for every wrong answer, one-third of a mark is deducted. No marks are awarded or deducted for unattempted questions. The CBT 1 score is used for shortlisting candidates for CBT 2, which is approximately 20 times the number of vacancies. Scores are normalised across sessions to ensure fairness.

In-Article FAQ: Is there negative marking in RRB NTPC UG CBT 1 2026? Yes. There is a negative marking of 1/3 mark for every incorrect answer. Unattempted questions carry no penalty.

Regional RRB Websites — Where to Download the Admit Card

Candidates must download their hall ticket from the official website of the RRB region under which they applied. The common candidate login portal rrb.digialm.com also provides a centralised access point. Candidates are advised to avoid third-party websites that may claim to host the admit card, as these are unofficial and may carry inaccurate or malicious content.

Important Instructions for Exam Day — Read Before June 13

Candidates appearing in the June 13 exam must keep the following exam day instructions in mind:

• Report to the examination centre well before the reporting time mentioned on your admit card. Late arrivals will not be allowed entry under any circumstances.

• Mobile phones, electronic devices, smartwatches, calculators, and wallets are strictly prohibited inside the examination hall.

• Carry only the admit card, one original photo ID, and a passport-size photograph.

• Read all instructions printed on the admit card carefully before the exam day.

• The examination centre details, including the exact address, are mentioned on the hall ticket. Plan your route in advance.

• Candidates appearing in different shifts must note their specific reporting and exam start times accurately.

About RRB NTPC UG Recruitment 2026 — Background and Selection Process

The RRB NTPC 2026 recruitment drive under CEN 07/2025 aims to fill 3,058 vacancies for various undergraduate-level Non-Technical Popular Categories posts in Indian Railways. The selection process consists of multiple stages: CBT 1 (Phase 1 and Phase 2), CBT 2, Computer-Based Aptitude Test (CBAT) for Station Master posts, Typing Skill Test for specific posts, and Document Verification.

CBT 1 is qualifying in nature — its normalised score is used only for shortlisting candidates for CBT 2. The final merit is determined based on CBT 2 performance. Candidates applying for the Station Master post must additionally qualify the CBAT with a minimum T-Score of 42 in each test battery. For Typist posts, a Typing Skill Test at 30 WPM in English or 25 WPM in Hindi is required.