RRB Section Controller Exam 2026 Shift Timings:The Railway Recruitment Boards (RRBs) officially released the RRB Section Controller Admit Card 2026 on October 8, 2026, for the recruitment examination registered under Centralised Employment Notice (CEN) 03/2026. The Computer-Based Test (CBT) is scheduled to take place across multiple authorized centers on October 12 and October 13, 2026.
Candidates are strictly advised to review their individual hall tickets to verify the allocated exam slot, exact reporting schedule, gate-closing rules, and test center location. Below is the comprehensive guide to help you prepare effectively for the exam day.
The Railway Recruitment Boards are conducting the 120-minute Computer-Based Test (CBT) across two distinct daily shifts on October 12 and 13, 2026. Candidates must carefully review the RRB Section Controller Shift Timings 2026 to ensure they plan their journey to the allocated venue on time.
The detailed schedule for the RRB Section Controller CBT timing across all exam dates is provided below:
| RRB Section Controller Exam 2026 Shift Timings | ||
| Exam Date | Shift | Exam Timing |
| October 12, 2026 | Shift 1 | 9:00 AM – 11:00 AM |
| October 12, 2026 | Shift 2 | 2:00 PM – 4:00 PM |
| October 13, 2026 | Shift 1 | 9:00 AM – 11:00 AM |
| October 13, 2026 | Shift 2 | 2:00 PM – 4:00 PM |
Note: Verify your specific shift assignment and exam slot on your official hall ticket downloaded from the regional RRB portal.
Reaching the examination center well in advance is essential to complete pre-exam verification formalities without hassle. The RRB Section Controller reporting time 2026 is typically set around 60 to 90 minutes before the actual examination start time to allow sufficient time for biometric verification, photo capturing, and attendance logging.
Shift 1 Reporting: Candidates scheduled for Shift 1 (9:00 AM start) are generally advised to report by 7:30 AM.
Shift 2 Reporting: Candidates appearing for Shift 2 (2:00 PM start) are generally advised to report by 12:30 PM.
Gate Closing Time: The test center entry gates are locked strictly 30 to 45 minutes before the exam begins. For Shift 1, the RRB Section Controller gate closing time is typically 8:30 AM, and for Shift 2, it is 1:30 PM.
Crucial Notice: Late entry is strictly prohibited. Candidates arriving after the official gate-closing time will not be allowed inside the venue under any circumstances. Always rely on the exact reporting time printed on your physical admit card.
To gain entry into the test premises, candidates must present specific original documents at the security check posts. Failure to produce any required document will lead to immediate disqualification from taking the test.
Check the required RRB Section Controller documents required checklist below:
| RRB Section Controller Exam 2026: Documents to Carry | |
| Document | What Candidates Should Check |
| Printed Admit Card | Download and print a clear copy of the e-call letter downloaded from the official RRB portal. |
| Valid Photo ID Proof | Carry the original valid photo ID (e.g., Aadhaar Card, Passport, PAN Card, Voter ID, or Driving License). |
| Passport-size Photograph | Keep a recent color passport-size photograph handy if required for attendance sheet affixation. |
| Additional Declaration/Certificate | Carry scribe details, caste certificates, or medical/PwBD certificates only if applicable and mandated by official instructions. |
Important Note: Digital ID proofs on mobile phones, photocopies, or laminated photocopies of ID cards are not accepted as valid identity proof at the exam gate.
Adhering to the official RRB Section Controller exam day guidelines guarantees a smooth experience inside the computer laboratory. Candidates must adhere to the following key RRB Section Controller CBT rules:
Read all instructions printed on the e-call letter carefully before leaving for the center.
Double-check the exam date, shift number, center name, and complete land address printed on your hall ticket.
Carry mandatory original documents in the specified format.
Cooperate with the security staff during frisking and biometric/Aadhaar verification steps.
Sit strictly at the allocated computer node assigned to your roll number.
Follow all instructions communicated by the hall invigilators throughout the test duration.
To maintain examination integrity, the Railway Recruitment Boards enforce strict rules regarding items permitted inside the hall.
Printed copy of the RRB Section Controller Admit Card.
Original, valid government-issued photo ID card.
Recent passport-size photograph.
Transparent water bottle (if permitted by center rules).
Electronic gadgets including mobile phones, smartwatches, Bluetooth earphones, and calculators.
Books, notebooks, study materials, or loose sheets of paper.
Handbags, backpacks, wallets, or metallic accessories.
Food items or chewables inside the examination room.
A candidate can prevent avoidable stress by planning the logistical aspects of exam day in advance:
Locate the Venue Early: Check the test center location a day before the examination to estimate travel time and avoid morning delays.
Plan Transportation: Use reliable public or private transit options that account for potential traffic bottlenecks.
Follow Node Allocation: Once inside the computer lab, check your lab number and computer terminal carefully as indicated on the notice boards.
Report Technical Issues Immediately: If your computer system freezes, experiences network lag, or faces hardware issues during the exam, inform the invigilator immediately.
Admit Card Discrepancies: If you find misprints in your name, photograph, or signature on the hall ticket, contact your respective regional RRB desk via official email/helpline before exam day.
If you forget your admit card or original ID proof on exam day, entry will be denied by the security team. RRB guidelines strictly prohibit candidates from sitting for the test without verifying their identity.
Do not expect entry based on soft copies, photocopies, or verbal requests.
If you forget your printed admit card, locate a nearby internet café or printing stall immediately to print a fresh copy from the official RRB website using your registration credentials.
If you leave your original ID at home, arrange for someone to deliver it to the test center before gate closing time.
While this guide focuses on shift timings and guidelines, candidates can download their hall ticket by logging into their regional RRB web portal. For city location details, refer to the RRB Section Controller City Intimation Slip 2026.
Admit Card Release Date: October 8, 2026
CBT Exam Dates: October 12 and 13, 2026
Recruitment Notice: CEN 03/2026
Exam Mode: Computer Based Test (CBT)
Required Login Credentials: Registration Number and Password / Date of Birth
To download your e-call letter directly, visit the official RRB Section Controller Admit Card 2026 download link. For detailed question paper patterns and previous year trends, check the RRB Section Controller Question Paper 2026 resource, and monitor the latest slot updates via the dedicated RRB Section Controller Shift Timings 2026 portal.
