

Water changes its form with changes in temperature, but its basic nature remains the same. You can observe these changes when ice melts, water boils, or wet clothes dry in the sunlight. Understanding these everyday examples makes the chapter States of Water easier to learn.
For Class 6 Science, PW covers important concepts through video explanations, revision, live and recorded classes, resources, and practice material. These notes will help you understand the three states of water, the processes involved in changing states, and the water cycle.
Water exists in the following states:
Solid: Ice
Liquid: Water
Gas: Water Vapour
Ice has a fixed shape and can be held. Liquid water flows and takes the shape of its container. Water vapour spreads through available space. Although their properties differ, all three remain water.
A change in temperature can change the state of water.
|
Change |
Conversion |
Process |
|---|---|---|
|
Cooling liquid water |
Liquid to solid |
Freezing |
|
Heating ice |
Solid to liquid |
Melting |
|
Heating liquid water |
Liquid to gas |
Boiling or Vaporisation |
|
Liquid water changing to gas without direct external heat |
Liquid to gas |
Evaporation |
|
Cooling water vapour |
Gas to liquid |
Condensation |
When liquid water is cooled, it changes into ice. This process is called freezing.
Evaporation is the process in which liquid water changes into gaseous water vapour. It can occur without supplying external heat and can take place at room temperature. The water absorbs heat from its surroundings to change into vapour.
Examples include:
Puddles disappearing after rainfall
Water on a washed plate gradually disappearing
Wet clothes drying
A mopped floor becoming dry
Sweat on wet clothing evaporating
Water disappearing from a surface does not always mean absorption. For example, water on a plate is not usually absorbed by the plate; it changes into water vapour. Some puddle water may seep into the soil, while the exposed water may evaporate.
Condensation is the conversion of water vapour from the gaseous state into liquid water by cooling.
When a cold bottle or glass is kept in open air, droplets appear on its outer surface. These droplets do not come from the water inside the container. Water vapour in the surrounding air touches the cold surface, cools, and changes into liquid droplets.
Examples of condensation include:
Dew drops forming on leaves
Droplets appearing outside a glass containing a cold drink
Droplets forming on a lid placed over hot water
Need a quick revision before your Science test? Subscribe to the PW Class 6 YouTube Channel.
Ice:
Has a fixed shape
Has a fixed volume
Does not flow
Does not spread to fill available space
Keeps its shape in different containers
Liquid water:
Has no fixed shape
Takes the shape of its container
Can flow and spread
Has a constant volume
For example, if 200 millilitres of water is transferred to another container, its shape changes but its volume remains 200 millilitres.
Water vapour:
Has no fixed shape
Spreads through available space
Can move throughout a room
Is generally invisible
Water vapour is present in the atmosphere along with gases such as oxygen and carbon dioxide.
|
Property |
Ice |
Liquid Water |
Water Vapour |
|---|---|---|---|
|
State |
Solid |
Liquid |
Gas |
|
Shape |
Fixed |
Takes the container’s shape |
No fixed shape |
|
Volume |
Fixed |
Constant |
Spreads through available space |
|
Flow |
Does not flow |
Flows |
Spreads through space |
|
Visibility |
Visible |
Visible |
Generally invisible |
A change in temperature changes the state of water.
During heating:
Ice changes to liquid water, and liquid water changes to water vapour.
Heating ice causes melting.
Heating liquid water causes boiling or vapourisation.
During cooling:
Water vapour changes to liquid water, and liquid water changes to ice.
Cooling water vapour causes condensation.
Cooling liquid water causes freezing.
When a solid is heated, it changes into a liquid. Therefore, heating ice changes it into liquid water. This process is called melting.
When liquid water is heated and changes into water vapour, the process is called boiling or vaporisation. It occurs when external heat is supplied, such as when water is heated in a container.
|
Boiling |
Evaporation |
|---|---|
|
External heat is supplied. |
No external heat is directly supplied. |
|
Liquid changes into gas through heating. |
Liquid changes into gas using heat from surroundings. |
|
Occurs at a fixed temperature, as stated in the lesson. |
Can occur at room temperature. |
|
Example: Water heated in a container. |
Example: Wet clothes drying. |
Do not confuse boiling with evaporation. Both change liquid into gas, but their conditions are different.
Want to make Science concepts easier to understand? Join PW Class 6 Batches.
Evaporation can occur in an air-conditioned room, a warm room, or indoors. It occurs faster at higher temperatures and more slowly at lower temperatures. Four main factors affect its rate.
Greater surface area produces faster evaporation.
A wet cloth spread out dries faster than the same cloth rolled into a ball. Water spread on a plate evaporates faster than the same amount kept in a small container.
Memory Tip: More surface area means faster evaporation.
Higher temperature produces faster evaporation.
A cloth dries faster in sunlight than indoors because it reaches a higher temperature.
Memory Tip: More heat means faster evaporation.
Moving air produces faster evaporation.
Clothes dry faster under a fan or in the wind. Moving air carries away water vapour near the surface, allowing more water to evaporate.
Memory Tip: More moving air means faster evaporation.
Humidity is the amount of water vapour present in the atmosphere.
High humidity causes slower evaporation because the air already contains much water vapour.
Low humidity causes faster evaporation because the air can accommodate more water vapour.
Evaporation is usually faster on a normal day and slower on a rainy day.
When water evaporates from a surface, the surface becomes cool. A wet hand feels cool after the water evaporates. Hand sanitiser produces a similar effect.
A liquid needs heat to change into a gas. During evaporation, it absorbs heat from the surface or surroundings. If water on the hand absorbs heat from the hand, the hand loses heat and feels cool.
Evaporation causes cooling because the evaporating liquid absorbs heat from the surface or surroundings.
Water remains cool in an earthen pot because the pot has many tiny pores. Water slowly passes through these pores and forms a thin layer on the outer surface. This water evaporates and produces cooling, which cools the water inside the pot.
Sweat cools the body when it evaporates. Evaporation removes heat from the body. Moving air increases evaporation, so sweat produces stronger cooling when air passes over wet skin or clothing.
The water cycle is the continuous movement of water from water bodies to the atmosphere and back to water bodies. Oceans, rivers, ponds, and lakes are important water bodies.
The sequence is:
Water bodies, evaporation, water vapour, condensation, clouds, rainfall, and water bodies.
The Sun heats water in oceans, rivers, lakes, and ponds. Liquid water changes into water vapour, which rises into the atmosphere.
As water vapour rises, it reaches cooler parts of the atmosphere. It cools and changes into tiny water droplets. These droplets form around dust particles and collect to form clouds.
Condensation is the process responsible for cloud formation.
When cloud droplets become sufficiently heavy, they fall to the ground as rain. Rainwater returns to oceans, rivers, ponds, lakes, and other water bodies. This completes the water cycle.
Revise the complete Class 6 Science chapter States of Water with this PW one-shot session. The video explains the three states of water, changes of state, evaporation, condensation, and the water cycle with easy-to-understand examples.
Find textbook questions difficult? Practise chapter-wise questions and understand their answers with PW Class 6 NCERT Solutions.
The chapter States of Water explains how temperature changes water between solid, liquid, and gaseous forms, while evaporation and condensation drive the water cycle. Use PW Class 6 batches, revision videos, and practice resources to strengthen your understanding and prepare for school examinations.