
Thermodynamics deals with energy, heat, work and temperature interactions between a system and its surroundings. These concepts help you understand how energy moves and how different thermodynamic systems behave.
The Zeroth Law underpins temperature measurement, while heat and work explain energy transfer across system boundaries. Understanding thermometric properties, calibration, sign conventions, displacement work and P-V diagrams is essential for GATE Mechanical Engineering (ME) and Chemical Engineering (CH) preparation. PW provides GATE preparation resources, lectures and practice support to help you strengthen these fundamental concepts and prepare for the examination.
The Zeroth Law of Thermodynamics states that if body A is in thermal equilibrium with body B, and body C is also in thermal equilibrium with body B, then bodies A and C are in thermal equilibrium with each other.
In terms of temperature:
T_A = T_C
T_B = T_C
Therefore, T_A = T_B
The Zeroth Law has two major purposes:
It provides the basis for defining temperature.
It explains how thermometers operate.
When a thermometer reaches thermal equilibrium with an object, its reading represents the object's temperature.
Ordinary temperature measurement involves an object and a thermometer. However, thermometer calibration also requires a reference body.
Ordinary temperature measurement: Object and thermometer.
Thermometer calibration: Object or reference body, thermometer and calibration reference.
Heat flows when two bodies have a temperature difference. At the microscopic level, temperature represents the average kinetic energy of molecules. Higher molecular motion generally corresponds to a higher temperature.
A thermometer requires a property that changes with temperature and can be measured conveniently. This property is called a thermometric property.
Mercury-in-glass thermometer: Uses the length of the mercury column, which changes due to the expansion of mercury.
Constant-volume gas thermometer: Uses pressure, which is proportional to temperature at constant volume.
Constant-pressure gas thermometer: Uses volume, which is proportional to temperature at constant pressure.
Thermistor: Measures temperature through changes in electrical resistance.
Thermocouple: Uses thermoelectric emf produced through the Seebeck effect.
Pyrometer: Measures temperature using radiation intensity or wavelength.
For an ideal gas:
PV = MRT
At constant volume:
P ∝ T
At constant pressure:
V ∝ T
A thermocouple works through the Seebeck effect. When two dissimilar metals have junctions at different temperatures, an emf is produced. A pyrometer measures temperature through the thermal radiation emitted by an object.
Preparing for GATE Mechanical or Chemical Engineering? Visit the PW GATE Wallah YouTube Channel for subject-wise lectures, concept explanations and examination preparation.
Also, check: GATE ME Notes
Calibration establishes the relationship between a thermometric property and temperature. If the property is represened by P, a linear calibration relation is:
T = a + bP
Here, P may represent pressure, volume, resistance, emf or column length, depending on the thermometer.
The usual reference points are:
Ice Point: 0°C
Steam Point: 100°C
Let P_i represent the thermometric property at the ice point and P_s represent the property at the steam point.
The calibrated temperature is:
T = 100(P - P_i) / (P_s - P_i)
At the ice point, ice and water coexist at one atmospheric pressure. At the steam point, water and steam coexist at one atmospheric pressure. The measured properties at these points provide P_i and P_s.
Gas thermometers generally use the triple point of water as a reference. The triple-point temperature is 273.16 K.
The calibration equation is:
T = 273.16 × P / P_triple
This method uses one reference point, whereas most other thermometers use the ice point and steam point.
Two-Point Calibration
Reference points: Ice point and steam point.
Number of calibration points: Two.
Main use: Most thermometers.
Temperature basis: 0°C and 100°C.
Single-Point Calibration
Reference point: Triple point of water.
Number of calibration points: One.
Main use: Generally gas thermometers.
Temperature basis: 273.16 K.
Temperature scales are conventional systems used to represent temperature. Their numerical values are assigned through defined reference points.
Celsius Scale: Ice point is 0°C and steam point is 100°C.
Fahrenheit Scale: Ice point is 32°F and steam point is 212°F.
Kelvin Scale: Ice point is 273.15 K and steam point is 373.15 K.
The Kelvin scale is an absolute temperature scale. It begins at 0 K, so Kelvin temperatures are not negative.
Consider a new temperature scale n with an ice point of 80°n and a boiling point of 330°n.
The relationship between the new scale and Celsius is:
n = 80 + 2.5C
The two scales have equal numerical values when:
n = C
Therefore:
C = 80 + 2.5C
-1.5C = 80
C = -53.33°C
Want to strengthen your understanding of thermodynamics for GATE? Read PW’s Basic Thermodynamics: Laws of Thermodynamics GATE 2027 ME and CH Preparation
Energy can cross a system boundary through three main mechanisms:
Mass transfer
Work transfer
Heat transfer
In a closed system, mass cannot cross the boundary. Therefore, energy transfer takes place through heat or work.
Heat transfer is the transfer of energy due to a temperature difference between a system and its surroundings.
Energy crossing the system boundary through any method other than heat transfer is classified as work transfer.
Examples include:
Electrical energy
Piston displacement
Shaft work
Mechanical energy
Both heat and work are transient forms of energy. They are meaningful only while energy is crossing the system boundary.
In mechanics, work is related to force and displacement. In thermodynamics, work is defined as follows:
Work is said to be done by a system when the sole effect external to the system can be reduced to the lifting of a weight.
In practical terms, energy crossing the system boundary in a form other than heat transfer is work transfer.
Work is a boundary phenomenon. It is not stored inside a system as a property.
The sign convention for heat and work is important when solving thermodynamic problems.
Work done by the system: Positive.
Work done on the system: Negative.
Heat supplied to the system: Positive.
Heat rejected by the system: Negative.
During expansion, the system does work on the surroundings, so work is positive. During compression, work is done on the system, so work is negative.
Consider a piston-cylinder system undergoing a small displacement. The differential work is:
dW = F dx
Since pressure is:
P = F/A
Therefore:
dW = P A dx
As A dx = dV:
dW = P dV
The displacement work between states 1 and 2 is:
W₁₋₂ = ∫₁² P dV
This relation applies to a closed system undergoing a quasi-static process. For reversible work, the process must also be frictionless.
On a pressure-volume (P-V) diagram, P dV represents a small area.
Therefore, the area under the process curve, projected on the volume axis, represents the closed-system reversible work.
1. Constant-Volume Process
At constant volume:
dV = 0
Therefore:
W = 0
No displacement work occurs because the volume does not change.
2. Constant-Pressure Process
At constant pressure:
W = P(V₂ - V₁)
3. Isothermal Process
For an ideal gas at constant temperature:
PV = Constant
Therefore:
P₁V₁ = P₂V₂
The work is:
W = P₁V₁ ln(V₂/V₁)
4. Reversible Adiabatic Process
For a reversible adiabatic process:
PV^γ = Constant
Where:
γ = Cₚ/Cᵥ
No heat transfer occurs in an adiabatic process.
The work is:
W = (P₁V₁ - P₂V₂)/(γ - 1)
5. Polytropic Process
For a polytropic process:
PVⁿ = Constant
Where:
1 < n < γ
The work is:
W = (P₁V₁ - P₂V₂)/(n - 1)
Constant Volume: V = Constant; work = 0.
Constant Pressure: P = Constant; work = P(V₂ - V₁).
Isothermal: PV = Constant; work = P₁V₁ ln(V₂/V₁).
Polytropic: PVⁿ = Constant; work = (P₁V₁ - P₂V₂)/(n - 1).
Reversible Adiabatic: PV^γ = Constant; work = (P₁V₁ - P₂V₂)/(γ - 1).
Preparing for GATE 2027 Mechanical or Chemical Engineering? Explore PW GATE batches.
For an individual thermodynamic process, work is represented by the area under the P-V curve. For a complete cycle, net work is represented by the area enclosed by the cycle.
The direction of the cycle determines the sign of net work:
Clockwise Cycle: Positive net work. Commonly associated with engines.
Anticlockwise Cycle: Negative net work. Commonly associated with refrigerators and heat pumps.
Work is a path function. Different paths between the same initial and final states can produce different work values.
Work values can be compared using the areas under the respective P-V curves.
For expansion from the same initial state to the same final pressure:
W_adiabatic < W_polytropic < W_isothermal
For expansion from the same initial state to the same final volume:
W_adiabatic < W_isothermal < W_constant pressure
These comparisons follow from the areas under the respective P-V curves.
Understand the fundamentals of heat and work in Basic Thermodynamics for GATE 2027 Mechanical and Chemical Engineering. Learn about energy interactions, sign conventions, thermodynamic work, different processes and P-V diagrams with this PW video.
The Zeroth Law, temperature measurement, thermometric properties, heat and work form the foundation of thermodynamics. Understanding their equations, sign conventions, and P-V diagram representations can help you solve conceptual and numerical questions in GATE Mechanical and Chemical Engineering.
Revise the important formulas, practise numerical problems and solve previous years' questions (PYQs) to improve your accuracy and problem-solving skills. PW's GATE lectures, preparation resources and batches can also support your learning and help you build a strong foundation for GATE 2027.