
The First and Second Laws of Thermodynamics explain how energy is transferred, how energy is balanced in thermodynamic systems, and the direction and feasibility of thermodynamic processes. The First Law focuses on energy conservation and heat and work interactions, while the Second Law explains the direction of processes and introduces the concept of entropy.
For GATE 2027 ME and CH preparation, these laws are important for understanding open and closed systems, steady-flow energy analysis, reversible and irreversible processes, heat engines, refrigerators, the Carnot cycle, and thermodynamic efficiency. These concepts also help aspirants solve conceptual and numerical problems.
The First and Second Laws of Thermodynamics are important parts of GATE 2027 preparation. The First Law helps aspirants understand energy conservation, heat and work transfer, and energy analysis in thermodynamic systems. The Second Law explains the direction and feasibility of processes, entropy, and the performance of thermodynamic cycles. The key topics covered in this section are summarised below.
|
Topic |
What You Will Learn |
|
First Law of Thermodynamics |
Energy conservation and energy balance in thermodynamic systems |
|
Open and Closed Systems |
Mass and energy transfer across system boundaries |
|
Steady-Flow Energy Equation |
Energy analysis of steady-flow systems |
|
Flow Work and External Work |
Work interactions in open systems |
|
Nozzle and Turbine |
Application of SFEE to common flow devices |
|
Throttling Process |
Isenthalpic process and its characteristics |
|
Unsteady-Flow Systems |
Mass and energy balance for changing control volumes |
|
2nd Law of Thermodynamics |
Direction and feasibility of thermodynamic processes |
|
Kelvin–Planck Statement |
Limitations of heat engines |
|
Clausius Statement |
Direction of heat transfer and limitations of refrigerators |
|
Reversible and Irreversible Processes |
Conditions, characteristics, and causes of irreversibility |
|
Entropy |
Entropy change and its role in thermodynamic processes |
|
Entropy Generation |
Irreversibility associated with real processes |
|
Carnot Cycle |
Working, efficiency, and important relations |
|
Heat Engine |
Thermal efficiency and performance |
|
Refrigerator and Heat Pump |
COP and relationship between heat transfer and work |
|
GATE 2027 Focus |
Important concepts, formulas, and applications for GATE ME and CH problems |
An open system is a system in which both mass and energy cross the system boundary. Energy may cross through:
Heat transfer
Work transfer
Mass transfer
A control volume is a fixed region selected for analysis. Its boundary is called the control surface. In a turbine, fluid enters and leaves the control volume continuously. Heat transfer, work transfer, and mass transfer may occur across the control surface.
The inlet is generally represented by state 1, and the exit by state 2. The important quantity for an open system is the mass-flow rate.
|
Closed System |
Open System |
|---|---|
|
A fixed mass is analysed. |
Mass continuously enters and leaves. |
|
Also called a control mass. |
A mass-flow rate is analyzed. |
|
Mass does not cross the boundary. |
Mass crosses the control surface. |
|
Energy crosses through heat and work. |
Energy crosses through heat, work, and mass transfer. |
Want to prepare with the right batch? Explore the latest exam-focused courses and GATE batches on PW.
A steady flow exists when flow properties do not change with time at a given location. Under steady-flow conditions, there is no accumulation of mass or energy inside the control volume.
An unsteady flow exists when properties change with time at a given location. Mass and energy can accumulate in the control volume.
|
Steady Flow |
Unsteady Flow |
|---|---|
|
Properties remain constant with time at a location. |
Properties change with time at a location. |
|
No accumulation occurs under steady conditions. |
Accumulation may occur. |
The terms uniform and non-uniform describe variation with space:
Uniform flow: Properties do not change from one location to another at a given time.
Non-uniform flow: Properties change with location at a given time.
Open-system analysis includes external work and flow work.
External work crosses the system boundary through a mechanism other than fluid pressure. Examples include:
Shaft work delivered by a turbine
Shaft work supplied to a compressor
Work transferred through an external mechanical connection
The separate work term in the SFEE represents external work.
Flow work is the work required to push fluid across the control boundary due to fluid pressure or normal fluid force.
Flow work per unit mass is:
w_flow = p v
The flow-work rate is:
W_flow = m_dot p v
Flow work is already included in enthalpy because:
h = u + p v
Therefore, the separate work term in the SFEE is external work, not flow work.
Using the convention that work done by the system is positive:
Inlet flow work is negative: W_flow,in = -m_dot p1 v1
Exit flow work is positive: W_flow,out = +m_dot p2 v2
For steady flow:
Mass entering equals mass leaving.
There is no mass accumulation.
There is no energy accumulation.
The rate form of the SFEE is:
m_dot h1 + m_dot C1²/2000 + m_dot g z1/1000 + Q_dot = m_dot h2 + m_dot C2²/2000 + m_dot g z2/1000 + W_dot_CV
Here:
h is specific enthalpy.
C is velocity.
z is elevation.
Q_dot is heat-transfer rate.
W_dot_CV is external work rate.
The specific form is:
h1 + C1²/2000 + g z1/1000 + q = h2 + C2²/2000 + g z2/1000 + w_CV
All terms in the specific form are expressed in kilojoules per kilogram. The rate form uses kilojoules per second, or kilowatts.
The SFEE is valid for both reversible and irreversible processes. The velocity is written as C because V is reserved for volume.
Need help planning your preparation? Check the GATE syllabus and GATE study resources on PW.
The Steady-Flow Energy Equation (SFEE) is applied to different flow devices to analyse energy transfer during steady-flow processes. For the GATE exam, understanding these applications helps in solving numerical problems involving nozzles, turbines, valves, compressors, and other thermodynamic devices.
For an adiabatic horizontal nozzle with no work transfer:
Heat transfer is zero.
Potential-energy change is zero.
The SFEE becomes:
h1 + C1²/2000 = h2 + C2²/2000
Using the lecture values, h1 = 3200, C1 = 40 m/s, and h2 = 2850, the exit velocity is:
C2 = 837.6 m/s
The mass-flow relation used to find exit area is:
m_dot = A C / v
Thus:
A1 C1 / v1 = A2 C2 / v2
The calculated exit area is approximately 140 cm².
For a turbine, the SFEE includes enthalpy, kinetic energy, potential energy, heat transfer, and shaft work. With the given lecture data, including a mass-flow rate of 2 kg/s and heat loss of 20 kW, the turbine work output is:
W_dot_t = 1360.1 kW
A throttling valve or capillary tube is commonly analysed using these assumptions:
Steady flow
Adiabatic process
Negligible kinetic-energy change
Negligible potential-energy change
No work transfer
The SFEE reduces to:
h1 = h2
Therefore, throttling is an isenthalpic process. It is also a highly irreversible process. The absence of heat and work transfer does not make the process reversible.
For an ideal gas:
dh = Cp dT
Since throttling gives dh = 0, temperature remains constant:
T1 = T2
The Joule–Thomson coefficient for an ideal gas is zero.
For a closed system, reversible boundary work is:
w_closed = Integral of p dv
For an open system:
w_open = - Integral of v d
The open-system expression is valid only for reversible processes. It is path-dependent.
|
Process |
Reversible Open-System Work |
|---|---|
|
Constant pressure |
Zero, because dp = 0 |
|
Constant volume |
w_open = v(P1 - P2) |
|
Isothermal |
Equal to reversible closed-system work |
|
Adiabatic |
Includes the specific-heat ratio |
|
Polytropic |
Includes the polytropic exponent |
For a constant-pressure device such as a boiler, condenser, or heat exchanger, reversible open-system work is zero. For a pump handling liquid, specific volume is treated as nearly constant.
In an unsteady-flow system, mass and energy inside the control volume change with time. Examples include:
Filling an LPG cylinder or tank
Spraying a perfume bottle
The mass balance is:
dm_CV/dt = m_dot_i - m_dot_e
The energy balance, when kinetic and potential energy changes are neglected, is:
dU_CV/dt = m_dot_i h_i + Q_dot - m_dot_e h_e - W_dot_CV
For an insulated tank that is initially evacuated:
Initial mass is zero.
There is no exit flow.
Heat transfer is zero.
Control-volume work is zero.
The energy balance gives:
u2 = hi
For an ideal gas:
T2 = gamma Ti
Thus, the final temperature is the specific-heat ratio multiplied by the inlet temperature. This result is important in GATE problems involving the filling of rigid, insulated tanks.
Understanding the First and Second Laws of Thermodynamics helps GATE 2027 ME and CH aspirants build a strong foundation in energy analysis and thermodynamic processes. Revising concepts such as SFEE, entropy, reversibility, Carnot cycle, heat engines, and refrigerators can help in solving both conceptual and numerical problems.