
A capacitor is an electrical device used to store electric charge and energy in an electric field. It consists of two conducting plates separated by an insulating material or air. When connected to a battery, the plates acquire equal and opposite charges.
The ability of a capacitor to store charge is known as capacitance. It depends on the size and shape of the conductors, the distance between them, and the material placed between the plates.
Capacitor and capacitance is an important topic in JEE Physics. You should understand how capacitors work and how different factors affect their capacitance before solving numerical questions.
Matter contains positively charged protons and negatively charged electrons. When an external charged body is brought near an insulating material, it affects the arrangement of charges inside the material.
For example, when a positively charged body is placed near a dielectric, the electrons shift slightly towards it, while the positive charges shift in the opposite direction. This separation of charges is called polarisation.
The charges inside the dielectric cannot move freely through the material. Instead, their positions shift slightly, producing an electric field that opposes the external electric field.
If the applied electric field becomes too strong, the insulating material may lose its insulating property. This phenomenon is known as dielectric breakdown.
A capacitor stores electrical energy and releases it when required. It is used in electronic circuits, power supplies, cameras and many other electrical devices.
A battery generally supplies energy over a longer period, whereas a capacitor can release its stored energy quickly.
You can think of a capacitor as a small energy storage device. It collects charge when connected to a suitable source and releases that energy when the circuit requires it.
An isolated conductor can store electric charge when a potential difference is established between it and a reference point, usually taken at infinity.
Its capacitance tells you how much charge it can store for a given potential difference. It depends on the conductor's shape, size and geometry, not on the amount of charge placed on it.
The SI unit of capacitance is the farad. A conductor has a capacitance of one farad when it stores one coulomb of charge for every one-volt potential difference.
Smaller units of capacitance include microfarads and picofarads.
An isolated spherical conductor has a capacitance that depends on its radius. A larger sphere can store more charge than a smaller sphere at the same potential difference.
As the radius of the sphere increases, its capacitance also increases.
Earth can also be treated as an isolated spherical conductor for basic electrostatic calculations. Although Earth is extremely large, its capacitance is only around 710 microfarads.
This helps you understand why one farad is considered a very large capacitance for an ordinary isolated conductor.
When two identical charged conducting drops merge, they form a single larger drop. During this process, the total charge remains conserved, but the radius, potential and capacitance change.
The volume of the new drop equals the combined volume of the two original drops. Therefore, the radius of the resulting drop increases.
Since the new drop carries the combined charge of both drops and has a larger radius, its potential also changes. Its capacitance increases because capacitance depends on the size of the spherical conductor.
Important for JEE: Remember that charge is conserved when charged drops merge. However, their potential and capacitance do not remain the same.
A parallel-plate capacitor consists of two flat conducting plates placed parallel to each other with a small gap between them. The plates carry equal and opposite charges.
When connected to a battery, one plate becomes positively charged while the other becomes negatively charged. An electric field is established in the region between the plates.
The capacitance of a parallel-plate capacitor depends mainly on three factors:
Area of the plates: Larger plates can store more charge and have greater capacitance.
Distance between the plates: Reducing the gap between the plates increases capacitance.
Material between the plates: Placing a suitable dielectric between the plates increases capacitance.
For an ideal parallel-plate capacitor, the electric field between the plates is uniform when edge effects are ignored.
A dielectric is an insulating material placed between the plates of a capacitor. Examples include glass, mica, paper and certain plastics.
When a dielectric is inserted between charged capacitor plates, its molecules become polarised. This produces an electric field that opposes the original field inside the capacitor.
As a result, the potential difference decreases if the capacitor is disconnected from the battery and its charge remains unchanged. This allows the capacitor to store more charge when connected to a battery at the same voltage.
The dielectric constant tells you how much the capacitance increases when a dielectric completely fills the space between the plates.
The two plates of a charged capacitor carry opposite charges. Since opposite charges attract each other, an attractive force acts between them.
This force depends on the charge stored on the plates and their area. For a given charge, the force becomes stronger when the plate area is smaller.
This concept is useful in JEE questions involving the movement of capacitor plates, mechanical work and changes in stored energy.
Capacitors can have different shapes depending on their construction. Apart from parallel-plate capacitors, spherical and cylindrical capacitors are also important in electrostatics.
A spherical capacitor consists of two concentric conducting shells with different radii. The inner and outer shells carry equal and opposite charges.
The electric field exists in the space between the two shells. Its strength changes with the distance from the centre, so it is not uniform throughout the region.
The capacitance depends on the radii of both spherical shells. If the gap between the shells changes, their capacitance also changes.
A cylindrical capacitor consists of two coaxial conducting cylinders separated by an insulating material or air.
The electric field between the cylinders acts radially. Its strength changes with the distance from the central axis.
Therefore, calculating the capacitance of a cylindrical capacitor requires considering the variation in the electric field across the gap.
When the plates are inclined towards each other, the separation between them is not the same at every point.
One way to understand this arrangement is to divide the capacitor into several narrow sections. Each section can be treated as a small parallel-plate capacitor. These sections behave like capacitors connected in parallel.
This method helps solve questions involving non-uniform plate separation.
For more practice on different capacitor arrangements, refer to Capacitors and Capacitance, which covers different capacitor types and their applications in electrostatics.
A capacitor stores energy when it is charged. During charging, work is required to move charges from one plate to the other against the electric field that gradually develops.
The work done in charging the capacitor is stored as electrostatic potential energy.
The stored energy depends on the capacitance, charge and potential difference. It increases when more charge is stored on the plates.
Memory Tip: A capacitor stores energy in its electric field, not inside the conducting plates themselves.
Energy density refers to the amount of energy stored per unit volume.
In a parallel-plate capacitor, the energy is stored in the electric field between the plates. A stronger electric field means greater energy density.
This concept is useful when solving questions that compare the energy stored in capacitors with different electric field strengths or dielectric materials.
When an uncharged capacitor is connected to a battery through a resistor, some of the energy supplied by the battery is stored in the capacitor. The remaining energy is dissipated as heat in the resistor.
The same principle applies when charged capacitors are connected to each other and allowed to reach a common potential.
During charge redistribution, the total charge of an isolated system remains conserved. However, the electrostatic energy may decrease. The difference is generally converted into heat in the connecting wires and other circuit components.
Important for JEE: Do not assume that all the energy supplied by a battery is stored in the capacitor. Some energy is lost as heat during charging.
Capacitors are often connected in groups to obtain a required capacitance. The two basic arrangements are series and parallel combinations.
Before solving a capacitor network, identify the points connected by ideal wires. All points joined by an ideal wire have the same potential. This helps you recognise the actual connections in a complicated circuit.
When capacitors are connected one after another in a single path, they are said to be in series.
In this arrangement, each capacitor carries the same magnitude of charge. However, the potential difference is divided among the capacitors.
The equivalent capacitance of capacitors in series is always smaller than the capacitance of the smallest individual capacitor.
When all the positive plates are connected to one common point and all the negative plates to another, the capacitors are in parallel.
Each capacitor has the same potential difference across it. However, the total charge is shared among the capacitors according to their individual capacitances.
The equivalent capacitance in a parallel combination is the sum of the individual capacitances.
Memory Tip: Series capacitors have the same charge, while parallel capacitors have the same potential difference.
A capacitor bridge contains four capacitors arranged in a bridge network. When the bridge is balanced, the two points connected by the central branch have the same potential.
As there is no potential difference across the central branch, it can be ignored while calculating the equivalent capacitance.
Do not neglect the central branch unless you have confirmed that the bridge is balanced.
You can also practise questions on Capacitors in Series and Parallel to understand how different capacitor networks work.
The position of a dielectric inside a capacitor affects how you calculate the equivalent capacitance. JEE questions commonly involve dielectric slabs placed along the separation between plates or across a part of the plate area.
When dielectric layers are placed one after another along the direction of the electric field, they behave like capacitors connected in series.
The same charge is associated with each layer, while the potential difference is divided between them.
If different dielectric materials occupy separate portions of the plate area, they behave like capacitors connected in parallel.
Each region has the same potential difference. Therefore, calculate the capacitance of each region separately and add the results.
Memory Tip: Dielectric layers along the separation act in series. Different regions across the plate area act in parallel.
When a dielectric is placed inside a charged capacitor, its molecules become polarised. The charges that appear on the dielectric surfaces are called bound charges.
These charges are different from the free charges present on the conducting plates. Their effect is to reduce the electric field inside the dielectric.
If a liquid dielectric fills only a part of the space across the plate area, the liquid-filled and air-filled regions behave like capacitors connected in parallel.
Calculate the capacitance of both regions separately and add them to obtain the total capacitance.
This approach is useful for questions involving a liquid being poured into a capacitor or a dielectric moving between its plates.
One of the most important concepts in capacitance questions is identifying whether the capacitor is connected to a battery or disconnected from it.
This decides which quantity remains constant when the plate separation or dielectric medium changes.
A battery maintains a constant potential difference across the capacitor.
Suppose the distance between the plates is reduced to half its original value. The capacitance doubles because the plates move closer.
Since the battery remains connected, the potential difference does not change. As a result, the charge stored on the plates and the energy stored in the capacitor both increase.
Once a charged capacitor is disconnected from the battery, its charge remains constant, assuming there is no leakage or conducting path.
If the plate separation is reduced to half its original value, the capacitance doubles. However, the potential difference and stored energy decrease.
Memory Tip: A battery-connected capacitor has constant voltage. A disconnected capacitor has constant charge.
An RC circuit contains a resistor and a capacitor connected to a voltage source or to each other. The resistor controls the rate at which the capacitor charges or discharges.
A capacitor does not charge or discharge instantly when connected through a resistor. Instead, the current and potential difference change gradually with time.
This time-dependent behaviour is an important part of JEE Physics.
The time constant tells you how quickly a capacitor charges or discharges through a resistor. It depends on the resistance and capacitance in the circuit.
A larger resistance or capacitance increases the time constant. This means the capacitor takes longer to charge or discharge.
After one time constant, a charging capacitor reaches about 63% of its final charge. During discharging, it retains about 37% of its initial charge.
Consider an initially uncharged capacitor connected to a battery through a resistor.
When the circuit is switched on, current begins to flow and charge starts building up on the capacitor plates. As the charge increases, the potential difference across the capacitor also increases.
This opposes the battery voltage and gradually reduces the current in the circuit.
The charging process has three important stages:
At the beginning: The capacitor is uncharged. Its potential difference is zero and the current is at its maximum.
During charging: The charge and potential difference increase, while the current gradually decreases.
After a long time: The capacitor becomes fully charged. Its potential difference becomes equal to the battery voltage and the current becomes nearly zero.
A charged capacitor discharges when it is connected to a resistor without the battery supplying energy to the circuit.
The stored charge begins to decrease, and current flows through the resistor. As the capacitor loses charge, its potential difference also decreases.
The process continues until the capacitor is almost completely discharged.
The energy initially stored in the capacitor is released and dissipated as heat in the resistor.
Important for JEE: During charging, current decreases with time. During discharging, the charge and potential difference also decrease with time.
Before attempting numerical questions, revise these basic concepts:
Capacitance depends on the conductor's geometry and the dielectric medium.
A dielectric increases the capacitance of a capacitor.
Charge remains conserved during the redistribution of charge in an isolated system.
Capacitors in series carry the same charge.
Capacitors in parallel have the same potential difference.
A battery-connected capacitor maintains a constant voltage.
A disconnected capacitor maintains a constant charge.
A capacitor stores energy in its electric field.
The time constant determines the rate of charging and discharging in an RC circuit.
To test your understanding, practise questions from JEE Main previous year question papers. These questions will help you understand how capacitance concepts are tested in the examination.
To strengthen your Physics preparation, practise electrostatics questions and revise important concepts regularly. You can explore PW JEE courses for Physics classes, practice questions and preparation resources for JEE Main and JEE Advanced.