
GATE Electronics & Communication Engineering Notes 2027
Feedback is an important concept in Analog Electronics that explains how a portion of an amplifier's output is returned to its input through a feedback network. For GATE preparation, understanding negative feedback, output sampling, input mixing and different feedback configurations is essential. These concepts also form the basis of several circuit-based questions in Electronics Engineering.
Physics Wallah notes help you understand important feedback concepts, identify amplifier connections and strengthen your conceptual understanding. Study voltage and current sampling, revise series and shunt mixing, remember different feedback nomenclature systems and practise circuit-based questions to prepare effectively for the GATE 2027 examination.
Feedback is the process of taking a portion of an amplifier's output and returning it to the input through a feedback network.
An amplifier receives an input signal and produces an amplified output. In a feedback system, a part of this output is returned to the input to control the overall amplifier response.
Feedback is broadly classified into two types:
Positive Feedback: The feedback signal supports or adds to the input signal.
Negative Feedback: The feedback signal opposes or subtracts from the input signal.
Negative feedback is widely used in amplifier circuits to improve stability, control gain and obtain better performance.
Also, check:
GATE Electronics & Communication Engineering Notes
GATE ECE Subject-Wise Weightage
An amplifier has an open-loop gain represented by A. When an input signal is applied, the amplifier produces an output.
A feedback network samples a portion of this output and returns it to the input. The feedback-network gain is represented by β (beta).
For negative feedback, the feedback signal opposes the input signal. Therefore, the effective input is obtained by subtracting the feedback signal from the original input.
The basic feedback process involves four steps:
A portion of the amplifier output is sampled.
The sampled signal passes through the feedback network.
The feedback signal returns to the amplifier input.
The feedback signal opposes the original input in negative feedback.
Every feedback arrangement involves two important operations:
Output Sampling: Determines which quantity is taken from the amplifier output.
Input Mixing: Determines how the feedback signal is combined with the input signal.
Therefore, feedback classification depends on identifying the sampling and mixing methods.
Output sampling determines whether the feedback network senses the output voltage or output current.
There are two types of output sampling.
Voltage sampling occurs when the feedback network senses the output voltage of an amplifier.
A voltmeter measures voltage and is connected in parallel with the circuit element. Similarly, voltage sampling requires the feedback network to be connected in parallel, also called a shunt connection, with the load.
Therefore:
Voltage Sampling = Shunt Connection at the Output
Memory Tip: A voltmeter is connected in parallel, so voltage sampling corresponds to a shunt connection.
Current sampling occurs when the feedback network senses the output current of an amplifier.
An ammeter measures current and is connected in series with the circuit. Similarly, current sampling requires the feedback network to be connected in series with the load.
Therefore:
Current Sampling = Series Connection at the Output
Memory Tip: An ammeter is connected in series, so current sampling corresponds to a series connection.
Input mixing determines how the feedback signal is combined with the original input signal.
In negative feedback, the feedback signal opposes the input. Depending on the connection, mixing is classified into voltage mixing and current mixing.
Voltage mixing occurs when the feedback voltage is connected in series with the input signal.
The input voltage and feedback voltage are combined according to Kirchhoff's Voltage Law (KVL).
Since voltage mixing involves a series connection, the feedback signal lies in the input KVL loop.
Therefore:
Voltage Mixing = Series Connection at the Input
Memory Tip: Voltage mixing is associated with KVL, and KVL is applied around a closed loop. Hence, voltage mixing corresponds to series mixing.
Current mixing occurs when the feedback current is combined with the input current at a common node.
The currents are combined according to Kirchhoff's Current Law (KCL).
Since current mixing involves a parallel connection, it is also called shunt mixing.
Therefore:
Current Mixing = Shunt Connection at the Input
Memory Tip: Current mixing is associated with KCL, which is applied at a junction or node. Hence, current mixing corresponds to shunt mixing.
A feedback circuit generally consists of an amplifier and a feedback network. The feedback element connects the output loop to the input loop and allows a portion of the output signal to return to the input.
The input and output loops depend on the type of amplifier.
Important examples include:
BJT Amplifier: The input loop is the base-emitter loop, while the output loop is the collector-emitter loop.
MOSFET Amplifier: The input loop is the gate-source loop, while the output loop is the drain-source loop.
Op-Amp Circuit: The input is associated with the inverting and non-inverting terminals, while the output loop is associated with the output terminal.
Identifying the feedback element requires locating the input and output loops and examining the connection between them.
Circuit-based questions in GATE often require identifying the feedback configuration from a given amplifier circuit.
A simple two-step method makes this classification easier.
First, examine how the feedback network is connected at the amplifier output.
If the feedback network is connected in parallel with the load, output voltage is sampled. This is voltage sampling.
If the feedback network is connected in series with the load, output current is sampled. This is current sampling.
Remember that the key is to identify whether the output voltage or current is being sensed.
Next, examine how the feedback signal is connected at the amplifier input.
If the feedback signal is connected in series with the input, voltage mixing occurs.
If the feedback signal is connected in parallel with the input, current mixing occurs.
The input connection can be examined using KVL and KCL.
For voltage mixing, the feedback signal must participate in the input voltage loop. For current mixing, the feedback signal is combined with the input current at a common node.
Memory Tip: First identify the output connection to determine sampling. Then examine the input connection to determine mixing. This two-step approach helps avoid confusion in feedback classification questions.
Feedback configurations are named using the sampling and mixing connections.
The commonly used nomenclature in GATE questions writes the mixing connection first and the sampling connection second.
The four feedback configurations are explained below.
Series-Shunt feedback involves:
Series mixing at the input.
Shunt sampling at the output.
Since series mixing corresponds to voltage mixing and shunt sampling corresponds to voltage sampling, this configuration is also called voltage-voltage feedback.
Shunt-Shunt feedback involves:
Shunt mixing at the input.
Shunt sampling at the output.
It corresponds to current mixing and voltage sampling.
Series-Series feedback involves:
Series mixing at the input.
Series sampling at the output.
It corresponds to voltage mixing and current sampling.
Shunt-Series feedback involves:
Shunt mixing at the input.
Series sampling at the output.
It corresponds to current mixing and current sampling.
Remember these four basic relationships:
Voltage Mixing = Series Mixing.
Current Mixing = Shunt Mixing.
Voltage Sampling = Shunt Sampling.
Current Sampling = Series Sampling.
Memory Tip: Remember the order as Mixing First, Sampling Second.
For example, Series-Shunt means series mixing at the input and shunt sampling at the output. Similarly, Shunt-Series means shunt mixing at the input and series sampling at the output.
Different naming conventions may be used to describe the same feedback configuration. Understanding these conventions is important for avoiding confusion in GATE examination questions.
In this nomenclature, the sampling connection is written first, followed by the mixing connection.
The four configurations are:
Voltage-Series: Voltage sampling and series mixing.
Voltage-Shunt: Voltage sampling and shunt mixing.
Current-Series: Current sampling and series mixing.
Current-Shunt: Current sampling and shunt mixing.
For example, Series-Shunt feedback in the conventional mixing-first nomenclature is called Voltage-Series feedback in this alternative system.
Another naming convention identifies the actual quantities sampled at the output and mixed at the input.
The four configurations are:
Voltage-Voltage: Voltage sampling and voltage mixing.
Current-Voltage: Current sampling and voltage mixing.
Voltage-Current: Voltage sampling and current mixing.
Current-Current: Current sampling and current mixing.
This nomenclature directly identifies the output quantity being sampled and the input quantity being mixed.
Memory Tip: Keep the naming order clear:
Series-Shunt: Mixing connection first, sampling connection second.
Voltage-Series: Sampling quantity first, mixing connection second.
Voltage-Voltage: Sampling quantity first, mixing quantity second.
Always identify the naming convention before classifying a feedback circuit. This prevents mistakes when different terminology is used in examination questions.
Want to improve your understanding of amplifier feedback and solve circuit-based questions with confidence? Explore PW's GATE batches
Feedback and its types are important topics in Analog Electronics for GATE 2027 ECE, EE and IN. Understanding output sampling, input mixing and the difference between series and shunt connections makes feedback classification easier. Revise the four basic feedback configurations, practise identifying feedback elements in amplifier circuits and remember the different naming conventions to avoid common examination mistakes. Strengthen your preparation with Physics Wallah GATE notes and regular circuit-based practice.